Neat, Drill-Free Mounting for Duotight Fittings
Keep gas manifolds and Duotight fittings securely organised inside your kegerator, keezer or home draught system with these Duotight 8mm adhesive wall clips.
Each bracket attaches to a clean, flat surface using its adhesive backing, eliminating the need to drill holes into your fridge or kegerator. The clip swivels after installation, allowing the attached fitting or manifold to be positioned at a suitable angle.
The Duotight fitting clicks into the bracket and can be removed from the clip when maintenance or line changes are required.
Each packet contains two adhesive mounting clips.
Why You'll Love Them
- Mount Duotight fittings without drilling holes
- Ideal for organising gas manifolds inside kegerators
- Adhesive backing attaches to clean, flat surfaces
- Swivelling design allows angled installation
- Fittings click securely into the bracket
- Attached fitting can be removed when required
- Helps keep gas lines neat and organised
- Suitable for compatible 8mm Duotight manifolds and multi-tees
- Supplied as a convenient two-pack
What's Included?
Each packet contains:
- Two Duotight 8mm adhesive wall clips
- Two adhesive mounting pads
Duotight fittings, manifolds, tubing and ball-lock disconnects are sold separately.
Compatible Duotight Fittings
These brackets are designed for compatible 8mm Duotight fittings with:
- Grey Duotight fitting body
- Black 8mm collet
- Suitable external mounting profile
Common compatible products include:
- Duotight 8mm two-way gas manifold
- Duotight 8mm four-way gas manifold
- Duotight 8mm six-way gas manifold
- Duotight 8mm five-way multi-tee
- Other compatible current-generation 8mm Duotight fittings
These clips are not compatible with 8mm ball-lock disconnects.
How to Install
For reliable adhesion:
- Turn the kegerator or keezer off and allow the mounting surface to reach room temperature.
- Make sure the surface is dry and free from condensation.
- Clean the mounting area thoroughly with isopropyl alcohol.
- Allow the surface to dry completely.
- Remove the adhesive backing and press the bracket firmly into position.
- Allow the adhesive to bond for at least 24 hours before attaching the fitting, manifold or connected lines.
- Click the compatible Duotight fitting into the bracket and rotate it to the required angle.
Cold, damp or dirty surfaces will reduce the strength of the adhesive.
Can the Bracket Be Repositioned?
The mounted clip can swivel to adjust the angle of the connected fitting.
However, the adhesive pad is not intended for repeated removal and reapplication. Choose the mounting position carefully before attaching it.
Does It Hold EVABarrier Tubing?
No. This bracket is designed to hold the body of a compatible Duotight fitting or manifold rather than clipping directly onto the tubing.
The attached fitting can then support connected 8mm OD EVABarrier beverage or gas lines.
Can It Be Installed Inside a Cold Kegerator?
Yes, but the kegerator must be switched off and allowed to warm up before installation.
The mounting surface must be dry and free from condensation. Allow at least 24 hours for the adhesive to bond before restarting the kegerator or placing weight on the bracket.
Will It Fit Ball-Lock Disconnects?
No. These brackets are not suitable for Duotight ball-lock disconnects.
They are intended for compatible grey Duotight fittings and manifolds fitted with black 8mm collets.
Why Buy from Border Brewing Supplies?
Border Brewing Supplies stocks Duotight fittings, EVABarrier line and kegging equipment for home brewers throughout Tweed Heads, the Gold Coast, Northern Rivers, Brisbane and the wider Queensland–New South Wales border region.
Shop online for Australia-wide delivery or select Click & Collect from our Tweed Heads South home brew shop.
Recommended Products
Complete or organise your kegging system with:
- Duotight two-way gas manifold
- Duotight four-way gas manifold
- Duotight six-way gas manifold
- Duotight five-way multi-tee
- 8mm OD EVABarrier gas line
- Duotight ball-lock disconnects
- Isopropyl alcohol surface cleaner
- CO₂ regulator and gas bottle
