Beer & Gas Hose Line

EVABarrier 6.3mm x 9.5mm

Double Wall EVA

A larger size hose normally used for gas or long draw keg systems. Perfect for faster flow transfers from Fermenter to keg or Keg to Keg. Its not recommended for direct draw kegerators as it does not apply much flow resistance. 

If you did use this beer line in your kegerator you will need about 6-8meters of beer line to get the adequate flow resistance and for this reason we would normally recommend the smaller 5mm or 4mm ID lines for Kegerator setups.

This type of line is quite commonly used with the icebank systems or temprite systems.  It's a very common size for long draw keg systems where lower line resistance is desirable.

Pressure Rating (with 1.5safety factor)
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi)